Stencil spray adhesive is intended for fabric, foam rubber, plastic, cardboard, leather, felt, paper, rubber, metal, wood, etc.

Use:

• Make sure the surfaces to be glued are clean and dry.
• Shake the can for 2 minutes before use. Spray while holding the can vertically.
• After use, turn the can upside down and spray until the nozzle is empty.
• When spraying again, shake the can once more.
• Apply the adhesive in one thin layer. Spraying distance: 1–2 cm from the surface.
• If the surface is porous, spray the adhesive onto one of the surfaces and press them together while the adhesive is still wet.
• If the surface is non-porous, spray the adhesive onto one of the surfaces and let it dry for approx. 20 minutes, then press the surfaces together. Press the bonded area firmly with your hand.

Warning! Extremely flammable aerosol. Pressurized container: may explode if heated. Causes serious eye irritation. Harmful to aquatic life with long-lasting effects. If medical advice is needed, have the product container or label at hand. Keep out of reach of children. Do not use in areas where heat, sparks, open flames, or hot surfaces are present. Do not smoke. Do not spray onto an open flame or other ignition sources. Do not pierce or burn, even after use. Avoid release into the environment. Wear protective gloves, protective clothing, eye protection, and face protection. Protect from sunlight. Do not expose to temperatures exceeding 50°C / 122°F. Dispose of contents/container in accordance with local/regional/international regulations.