• Easy to use
• Very economical

INSTRUCTION:

• Wash and iron the fabric.
  Lay the part of the fabric on wich you are going to work on a waterproof surface.
• Place the printed motif (caution: use a laser printer!) with the image side down on the textile and secure it all around with adhesive tape.
• If the design contains lettering, it must be printed as a mirror image.
• Apply the transfer medium to the paper with a brush and make sure that no puddles form, otherwise the subject will be blurred during transfer.
• The paper is absorbed quickly and the motif becomes visible.
• Then rub the back of the design with the rounded side of a bone folder or with a wooden spoon with a little pressure.
• In between, the template can be lifted a little to check it, but it must not slip.
• When you are satisfied with the transfer result, the stencil with the adhesive strips can be removed.
• The textile is dry after approx. 30 minutes and should then be  ironed on the reverse side for 2 to 3 minutes without steam at cotton temperature.
• Wash inside out at 30 ° C.

Attention!

• May produce an allergic skin reaction.
• Causes serious eye irritation.
• Harmful to aquatic life with long lasting effects.
• Avoid release to the environment.
• SKIN CONTACT: Wash with plenty of soap and water.
• EYE CONTACT: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.